The Taper Attach Direct Thread Adaptor provides a immediate thread interface for taper mounted suppressors. Two units of wrench flats make it equally easy to attach or remove from the suppressor or your firearm’s muzzle threads. No proprietary tools necessary. Available in 1/2×28 and 5/8×24 with 18x1mm support coming soon. While it is comfortable to have immediate thread suppressor ability that may move from web host to host without the need for further muzzle products, it is vital to remember that each host firearm must be checked for baffle alignment via visual inspection before firing.
The 1/2×28 Insert can be utilised with cartriges up to 30 caliber and the 5/8×24 works extremely well up to .338 caliber.
The use of immediate thread adaptors increases on immediate thread mounted suppressors, by allowing the end user to have modular thread pitches. One Taper Attach Suppressor to Rule Them All.
Black Nitrided
1.5 Ounce Weight
Wrench Flats for each contingency
Taper Attach Repeatability and Stability
Multi-Thread versatility for your Taper Install Suppressor
taper adapters allow the application of Taper Adapter holders or equipment with a different machine-side taper then your machine spindle taper, such as using a BT40 tapping chuck on a 50-taper spindle.
These adapters eradicate lead period losses in the event of a machine breakdown. Adapters can also help in testing custom equipment on another machine compared to the planned production machine.
Taper adapters avoid the need for a way to obtain new holders or equipment for a particular machine. They arrive prepared to employ with built-in locked clamping mechanisms featuring a clamping screw on a ball bearing for steep taper clamping or HSK locking product for taper clamping.
The steep taper may be the standardised form of an instrument taper for clamping tools in the key spindle of a machine tool
The steep taper is standardised in DIN 69871 part 1
No self-locking (in contrast with the Morse taper), thereby making tool changes easier without clamping. This is especially significant for programmed tool changes
Little clamping travel equals brief clamping time
High torsional rigidity because of the short distance between the cutting edge and spindle bearing (brief overall length)
For adapting morse taper equipment to milling devices that take R8 tools
Alloy steel hardened to 50-52 rc
Critical surfaces precision ground
Use in R8 Machines
Turning Equipment More taper minimizing sleeve can be used to convert your headstock by #2 MT to #1 MT. That is useful for those who have a drive center or pen mandrel which can be 1MT and your headstock is 2MT