Product Details

Rack and Pinion

A rack and pinion is a type of linear actuator that comprises a pair of gears which convert rotational motion into linear motion. This combination of Rack gears and Spur gears are generally called “Rack and Pinion”. Rack and pinion combinations are often used as part of a simple linear actuator, where the rotation of a shaft powered by hand or by a motor is converted to linear motion.
For customer’s that require a more accurate motion than ordinary rack and pinion combinations can’t provide, our Anti-backlash spur gears are available to be used as pinion gears with our Rack Gears.

 

304 STAINLESS STEEL RACK GEARS

Material (ISO) : SUS304
Module : 0.5 to 2.0
Overall length : 200mm – 1000mm

Rack gears made out of 304 stainless steel providing better corrosion resistance than 303 stainless steel.

POM RACK GEAR

Material : POM (Blue)
Module : 0.5 to 3.0
Overall length : 200mm – 1000mm

Blue Polyacetal (Blue POM) gears have a lower water absorption rate and dimensional stability compared with nylon gears, due to this greater material integrity POM has lower chances of bacterial and mold contamination and is therefor  approved by regulating authorities in the food industries of the US and Europe.

BRASS RACK GEARS

Material (ISO) : C3713P or C3604B
Module : 0.3, 0.5, 0.75, 0.8
Overall length : 200mm, 500mm

GROUND RACK GEARS

Material (ISO) : S45C Module : 0.5 to 1.5 Overall length : 200mm or 300mm Thermal refined material used

High precision ground rack gears provide high speed transfer and accurate positioning. Additional bolt holes and thread holes can be processed if requested.

304 STAINLESS STEEL ROUND RACK GEARS

Material (ISO) : SUS 304
Module : 0.5 to 1
Overall length : 200mm or 300mm

Rack gears made out of 304 stainless steel providing better corrosion resistance than 303 stainless steel.

STEEL RACK GEARS

Material (ISO) : S45C
Module : 1.0 to 5.0
Overall length : 300mm – 1600mm

STEEL RACK GEARS with BOLT HOLES

Material (ISO) : S45C
Module : 1.0 to 3.0
Overall length : 300mm – 1000mm

CPGROUND RACK GEARS

Material (ISO) : S45C
CP (Module) : 2 (0.636), 5 (1.591)
Overall length : 200mm – 300mm
Thermal refined material used

High precision ground rack gears for high speed transfer and accurate positioning. Additional bolt holes and tapped holes can be processed without tooth.

CPBRASS RACK GEARS

Material (ISO) : C3713P or C3604B
CP (Module) : 2 (0.636)
Overall length : 200mm – 500mm

CPSTEEL RACK GEARS

Material (ISO) : S45C
CP (Module) : 5 (1.591), 10 (3.183)
Overall length : 500mm – 1000mm

GAUGE RACKS

Material (ISO) : S45, SCM435
Module : 0.5 to 3.0
CP (Module) : 2 (0.636), 5 (1.591)
Overall length : 45mm – 90mm

GAUGE RACKS can be used to set appropriate gaps when connecting 2 or more rack gears.

Rack and Pinion

GROUND RACK GEARS

Material (ISO) : S45C
Module : 0.5 to 1.5
Overall length : 200mm or 300mm Thermal refined material used

High precision ground rack gears provide high speed transfer and accurate positioning. Additional bolt holes and thread holes can be processed if requested.

GROUND RACK GEARS

Material (ISO) : SCM435
Module : 1.0 – 3.0
Overall length : 500mm or 1000mm Induction hardened tooth

High precision ground rack gears provide high speed transfer and accurate positioning. Additional bolt holes and thread holes can be processed if requested.

304 STAINLESS STEEL RACK GEARS with BOLT HOLES

Material (ISO) : SUS 304
Module : 1.5, 2.0
Overall length : 300mm – 1,000mm

Rack gears made out of 304 stainless steel providing better corrosion resistance than 303 stainless steel.