Single and double reduction planetary gear drives to be used with electric, hydraulic, surroundings motors or mechanical power input from high speed, low torque sources to provide reduced speeds at increased torques. The input side has regular SAE pads for electric motor mounting. Obtainable in the three output configurations proven below. Many units can be furnished with an intrinsic parking brake.
One reduction drives are limited by 3500 RPM input; dual reduction drives to 5000 RPM. Units with essential parking input swiftness is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For constant operation reduce torque ratings to about 1/3 to 1/2 the values shown. Units provide 95% power tranny hydraulic planetary drive efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output part has hub for mounting automobile wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage feature can be regular on all wheel drives.
Shaft Output
Input side standard SAE pads with splined input. Output side choices include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined input. Output side has a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-large tapered roller bearings, a ductile iron hub and warmth treated ring gear to reduce backlash growth due to wear. The exterior bearing nut supplies the supreme in shaft retention and shaft strength. Output can be a spindle shaft or numerous sizes of essential pinion gears.