Single and dual reduction planetary gear drives to be used with electric, hydraulic, atmosphere motors or mechanical power insight from high rate, low torque sources to provide decreased speeds at increased torques. The input aspect has regular SAE pads for engine mounting. Obtainable in the three result configurations demonstrated below. Many units could be furnished with an integral parking brake.
Single reduction drives are limited to 3500 RPM input; dual reduction drives to 5000 RPM. Units with integral parking input velocity is limited to 2500 RPM.The same torque comes in either direction of rotation. Torque rankings are intermittent. For continuous operation Plastic Gear Rack reduce torque rankings to about 1/3 to 1/2 the values shown. Models provide 95% power transmission efficiency.
Wheel Drive
Input side has standard SAE pads and splined insight. Output side has hub for installation vehicle wheel. Free wheel is possible by using the spring disconnect to disengage the drive shaft. The disengage 
feature is usually standard on all wheel drives.
Shaft Output
Input side standard SAE pads with splined insight. Output side options include: Keyed circular, hexed, hollow, tapered or splined shaft.
Spindle Drive
Input side is regular SAE pads with splined input. Output side includes a flanged spindle for coupling to the strain.
Swing Drives
Ever-Power model 6 emerges with or without integral parking brakes. The “SW” Power Wheel has extra-huge tapered roller bearings, a ductile iron hub and warmth treated ring equipment to reduce backlash growth caused by wear. The exterior bearing nut supplies the greatest in shaft retention and shaft power. Output could be a spindle shaft or various sizes of integral pinion gears.