We – EPG Group the biggest gearbox & motors , couplings and gears factory in China with 5 different branches. For more details: Mobile/whatsapp/telegram/Kakao us at: 0086~13 571 88828 13858117778 571 88828
High Torque Low Rpm Planetary Gear Motor 56mm 12V
Gearbox data:
| Number of stages | 1stages reduction | 2 stages reduction | 3 stages reduction | 4 stages reduction | 5 stages reduction |
| Reduction ratio | 3.7,5.2 | 13.7,19.2,26.9 | 50.9,71.2,99.5,139 | 188,264,369,516,721 | 669,977,1367,1911,2672,3736, |
| gearbox length ” L” mm | 26.4 | 32.6 | 38.9 | 45.3 | 52.5 |
| Max.Running torque | 3.0Kgf · cm | 6.0Kgf · cm | 8.0Kgf · cm | 12.0Kgf · cm | 20Kgf · cm |
| Max. Gear breaking torque | 9.0Kgf · cm | 18.0Kgf · cm | 24Kgf · cm | 36Kgf · cm | 60Kgf · cm |
| Max. Gearing efficiency | 90% | 81% | 73% | 65% | 59% |
Motor data:
| Motor name | Rated volt.v | No load | Load torque | Stall torque | |||||
| Current | Speed | Current | Speed | Torque | Output power | Torque | Current | ||
| mA | r/min | mA | r/min | gf · cm | W | gf · cm | mA | ||
| TG-38123400 | 12 | ≤40 | 3400 | ≤180 | 2500 | 40 | 1.0 | 160 | 720 |
| TG-38124500 | 12 | ≤50 | 4500 | ≤350 | 3300 | 60 | 2.0 | 210 | 1400 |
| TG-38126000 | 12 | ≤70 | 6000 | ≤720 | 4500 | 80 | 3.6 | 300 | 2800 |
| TG-38243000 | 24 | ≤15 | 3000 | ≤80 | 2200 | 40 | 0.9 | 140 | 320 |
| TG-38244500 | 24 | ≤25 | 4500 | ≤180 | 3300 | 60 | 2.0 | 200 | 730 |
| TG-38246700 | 24 | ≤45 | 6700 | ≤360 | 4500 | 80 | 3.6 | 300 | 1400 |
| 1,This table lists some motors parameters, others please refer to specific parameters of tg-38-1.htm. 2,Afier connecting motor and gearbox which is named gearmotor the output torque:motor torque X reduction ratio X gearing efficiency;output speed:motor speed / reduction ratio. |
|||||||||
NOTE:
1, Gearmotor named methods: e . g . PG36M528123000-99.5K Motor please refer to the motor data TG-38123000.
Gearbox please refer to gearbox data reduction ratio99.5 .Related to gearmotor output speed and torque please
refer to motor data.
2, Motor can be installed wiht magnetic encorder. encorder parameters please refer to me-32.htm.
3,Standard output shaft after reducing: dia8.0mm. other sizes of then output shaft can make as client request.
4,Chart only for reference,products shall prevail the entity.
Company Introduction
The use of original equipment manufacturer’s (OEM) part numbers or trademarks , e.g. CASE® and John Deere® are for reference purposes only and for indicating product use and compatibility. Our company and the listed replacement parts contained herein are not sponsored, approved, or manufactured by the OEM.
