Fan Electric motor, 1/8 hp 120V 2.2 Amp 3-Speed
General Explanation: New fan motor, taken off unused 18” or 24” China Air Compressor diameter TPI fans. Designed to run an 18” or 24” enthusiast blade (blade NOT included).
This motor has a (detached) cord with grounded plug, motor capacitor and a 3-speed control switch. All of the wiring between your electric motor, capacitor and quickness control switch is still installed however the cord itself is normally detached as seen in the photos. (Find “Control Notice” below for modify type.)
T (See “Software Notice” below for utilize in various other applications.)
Measurements: The engine body is 5” diameter and 3 ½” long (excluding the shaft). The engine shaft is usually½” (0.500″) diameter x 2 ½” long with a collection screw simple. There are (4) threaded mounting lugs on the front of the motor, ½” long x .16 dia. with washers and nuts. The studs may actually ‘ve got 4mm threads and to become on a 117mm (4.6”)diameter circle (3 ¼” measured from one stud to another).
Rate: The approximate engine speeds (with a enthusiast blade attached):1660, 1550 and 1370 RPM. Path of rotation (facing the shaft end of the electric powered motor) is Clockwise.

Control Take note: Motors may come with EITHER a 3-swiftness rotating control KNOB OR a 3-speed PULL-CHAIN SWITCH (we have demonstrated BOTH versions in the images). Both of these types of switches both control the engine in the same way (but you have a rotating knob and you have a pull-chain). In the event that you order several engine at a time, we will do our better to supply your purchase with each one sort of control or the excess.
Application Note: Do NOT use this electric engine in a nonfan app. This is a completely enclosed fan electric electric motor and made to have constant ventilation over the electric motor casing for cooling. The casing isn’t vented and the electrical electric motor will overheat and enter automatic electric fan motor china thermal overload if operate in a nonfan system where there isn’t solid ventilation past the electric motor. (Caution Note: the electrical motor will restart immediately when it cools back off.) Using this electric motor for applications aside from 18 & 24″ TPI fans could also overload the engine and cause it to proceed into automated thermal overload. (Your companion blade from another producer may have a steeper blade angle.)
Origin: This electric engine is manufactured in China.