Cycloidal pinwheel reducer can be a up-dated of fresh type transmissing machine made with K-H-V less teeth engagement and the cycloidal pin steering wheel clenching mechanism, which are widely used in drive and reducing of textile and dying, foodstuff, mining and metallurgy, Oil and chemical cranes, project machinery etc, conveyors and Industry. various fields.
Features:

1. Equipment is made from high strength low carbon alloy metal by carburizing and quenching. The hardness of tooth surface area can reach HRC58-62. CNC grinding technology is adopted for all with high accuracy, good contact functionality and gears
2. high transmission proficiency: single stage over 96.5%; double stage over 93%; three stage over 90%;
3. stable operation and low noise;
4, compact structure, light-weight, long service existence and high bearing capability;
5. easy to check, assemble and disassemble.

Operation specifications and precautions
1.High modularization design: many equip with various electric motor or other power suggestions conveniently.Same machine type may equip with several power motor. It really is easy to know the combination and
junction between every machine type.
2.Transmission ratio: good division, wide scope. The combined machine type may form large transmitting ratio, i.e. output very low rotary speed.
3.Form of installation: the positioning to be installed isn’t limited.
4.High strength, small: the box body is constructed of high strength cast iron. Gear and gear shaft adapts the gas carbonization, quenching and fine grinding process, which means bearing ability of unitvolume is excessive.
5.Long life: Beneath the condition of appropriate type chosen (including choosing appropriate operation parameters)normal operation and maintenance, the life of main elements of speed reducer (except sporting parts) should not be less than 20000 hours. The putting on parts include lubricating essential oil, bearing and oil seal.
6.Low noise: because main elements of speed reducer are processed, assembled and tested critically,which means noise of speed reducer is going to be low;
7.Parallel axis -bevel wheel speed-down motor
cycloidal gear reducer

1. High acceleration ratio and efficiency
Single stage transmission may reach to 1 1:87 of speed-down ratio and the efficiency is certainly more than 90%. If make use of multi-speed travel the speed-down ratio is usually bigger.
2. Compact
Being adapted epicyclic tranny principle, the input and result shaft are in same axis middle, it is compact.
3. Smooth and steady run and low noise
The cycloidal pinwheel has more meshed teeth, the overlapping coefficient id big and the machine part is stable, the vibration and noise is bound anyway content.
1. Large deceleration ratio
A high deceleration ratio of 1/30-1/320 can be acquired.The structure is simple, but it can realize high reduction ratio device.
2. Small gear clearance
The Travel, which meshes with ordinary gears and has minimal backlash, is essential to the controller business.
3. High precision
Multiple teeth are involved at the same time, and there are two gears engaged with 180 degree symmetry. As a result, the effect of tooth pitch error and cumulative tooth pitch mistake on the rotation precision is relatively average, making the position precision and rotation precision reach a very high level.
4. Less parts, easy installation
The three basic elements achieve a higher deceleration ratio, plus they are all on a single axis, therefore the kit is simple to install and easy to shape.
5. Small in proportions and light in weight
Compared with the previous gear device, the quantity is 1/3, the pounds is 1/2, but can buy the same torque potential and reduction ratio, obtaining small lightweight.
6 High torque capacity
Flexible wheel materials USES unique steel with excessive fatigue strength.Different from ordinary transmission device, the quantity of teeth meshing makes up about on the subject of 30% of the full total amount of teeth. Moreover, it is in contact with the surface, in order that the pressure borne by each equipment is reduced and great torque capability can be obtained.
7 High efficiency
The sliding of gear meshing parts is quite small, which reduces the power loss caused by friction. Therefore, high lowering ratio may be accomplished while maintaining high proficiency, and miniaturization of traveling motor could be realized.
8. Low noise
The gear meshing cycle swiftness is low, the transmission activity force balance, which means operation is quiet, and the vibration is very small.
◆Excessive speed ratio and huge efficiency single-stage transmission can achieve a deceleration ratio of 1 1:87, and the efficiency is more than 90%. If multi-stage transmission is used, the deceleration ratio will get larger.
◆Because planetary transmission principle is adopted, the suggestions shaft and result shaft are on the same axis line, in order that the machine style can get the smallest possible size.
◆The number of meshing teeth of cycloidal needle teeth with smooth running noise and low cycloidal noise is more, the overlap coefficient is bigger, and the mechanism of balancing machine parts produces the vibration and voice limited to a minimum.
◆Reliable use and extended service life as the primary parts are made of large carbon chromium steel, large strength is usually obtained by quenching (HRC58-62), and rolling friction is utilized in a few transmission contacts, therefore the service life is prolonged.
Cycloid reducer is certainly a cycloid needle teeth meshing planetary transmission principle drive models, is an excellent transmission has various advantages, versatile, and can be both positive and negative operation.

•Big ratio, and large efficiency Smooth operation,

• low noise The use of reliable,

• extended life can reach 50000 hours

• Main parts high-carbon the Ming-metal after quenching treatment (HRC58-62),

• operation and connection with rolling friction, basically zero wear, durable.

• Compact structure,

• small size Because the usage of a planetary transmitting, the input shaft and the output shaft on the same axis, which makes the model to obtain the smallest possible size.

• Reasonable design, easy maintenance, and breakdown easily install,

• minimal number of parts and also basic lubrication, cycloid reducer trusted by an individual.
(1)Size above PL/PF120(including)high torque products adopt integral double wall world pinion carrier, improve the output strength and precision.

(2).Hoop clamp coupling have five connection ways ideal for different application environments.

(3).Size above PL/PF120(incorporating)precision and high strength integral inner gear housing, processed in a single station,which remove the cumulative mistake and assembling error of split type.Eliminate casting process;adopt sizzling of forging process, that may decrease the blank material defects.

(4).The meshing gear adopt shaving process after carburizing and quenching,which much easier to make gear surface area smooth and high precision,reduce the temperature rising due to gear area gluing and friction.
This series worm-gear reducer was built after RV worm microreducer, which have a complete norm, wide speed for selection, and many mounting positions. Its overall performance and mounting dime nsions conform the same kinds of foreign.
The mixture of worm and gear has higher efficiency and wider speed range to single worm.
Designation of square shape, beautiful shape, radiate heat efficiently, compact structure and low noise.
Great sealing and adaptability.Its combination with T equipment reducer and MB/MBN variator can meet a myriad of speed requirement.