Product Details
BEVEL GEARS
Bevel gears are most often used to transmit power at a 90° right angle. The axes of the two bevel gear shafts intersect and the tooth-bearing faces of the gears themselves are conically shaped. Bevel gears are most often mounted on shafts that are 90 degrees apart. Bevel gears are generally divided into 2 types, straight bevel gears and spiral bevel gears.
Straight bevel gears
In Straight bevel gears, the teeth are straight and parallel to the generators of the pitch cone. Compared with spiral miter gears, straight bevel gears can be made in smaller sizes. We standardized Straight bevel gears as small as module 0.5 in various materials.
Spiral bevel gears
Spiral bevel gears have their teeth formed along spiral lines. They are somewhat analogous to cylindrical type helical gears in that the teeth are angled; however, with spiral gears the teeth are also curved. Spiral bevel gears have a strength, oscillation and noise level advantage over straight bevel gears. The disadvantage of Spiral bevel gears is that they produce an axial thrust load. Therefore proper bearing location and firm support are required for their assembly. Our standard Spiral bevel gears offer 1:5 , 1, 2:1 and 3:1 gear ratios.
304 STAINLESS STEEL BEVEL GEARS
Material (ISO) : SUS304
Module : 0.8 – 2.0
Ratio : 2 :1
JIS B 1704 class 4
SUS304 stainless steel has better corrosion resistance than 303 stainless steel.
BRASS BEVEL GEARS
Material : C3604
Module : 0.5 – 2.0
Ratio : 2:1
JIS B 1704 class 4
STEEL BEVEL GEARS
Material (ISO) : C45
Module : 0.5 – 5.0
Ratio : 2:1
JIS B 1704 class 3
HARDENED STEEL BEVEL GEARS
Material (ISO) : S45C
Module : 1.5 – 5.0
Ratio : 2:1
JIS B 1704 class 4
INJECTION MOLDED PLASTIC BEVEL GEARS
Material : POM (Black)
Module : 0.8
Ratio : 2:1
Competitive price molded bevel gears.
BEVEL GEARS
GROUND SPIRAL BEVEL GEARS
Material (ISO) : SCM435
Module : 1.5 – 2.5
Ratio : 1.5:1 , 2:1 , 3:1
JIS B 1704 class 1
STEEL SPIRAL BEVEL GEARS
Material (ISO) : S45C
Module : 1.0 – 3.0
Ratio : 2:1 , 3:1
JIS B 1704 class 3
HARDENED SPIRAL BEVEL GEARS
Material (ISO) : S45C
Module : 1.0 – 3.0
Ratio : 2:1 , 3:1
JIS B 1704 class 4
