China high quality CZPT Paver RM 80743198 RM80743198 Planetary Gear for 8820 423 with Good quality

Product Description

  • Gear reducers for hydraulic motors – GB1314C  GB1314c GB1315

    This gear reducer is employed for example in road construction for applying asphalt. A conventional hydraulic motor serves as the drive. The type of chain wheel used makes it suitable for increased radial loads. The housing is specifically optimised for tensioning the chain.

    SPECIFICATIONS GB1314C
    Motor connection suitable for CHINAMFG motor OMT315
    Gear ratio i = 5,71
    Drive torque M1 = 740 Nm (at 150 bar;
    Gear design for 6/8822 0571
    R988/8822 0571
    R98857133 GFT60W3B86~/8822 0571
    R GFT7T2B51-01
    R98857156 GFT7T2B63-01
    R9880 0571 9 GFT80T3-185-03
    R9880 0571 6 GFT80T3B127-01 W/O MOTOR
    R988056701 GFT80T3B127-09
    R988064513 GFT80T3B127-09 W/O MOTOR
    R988006366 GFT80T3B150-01
    R988006367 GFT80T3B150-02
    R988006370 GFT80T3B185-06
    R98857127 GFT80T3B185-10
    R988049613 GFT80T3B185-10 W/O MOTOR
    R988062758 GFT80T3B185-11
    R988006374 GFT80T3B204
    R988006375 GFT80T3B77-01
    R988006551 GFT80W3B127-07
    R988006866 GFT80W3B127-14
    R988018309 GFT80W3B127-17
    R98857113 GFT80W3B127-19
    R98857163 GFT60A3B65-03
    R988006277 GFT60T3B106-03
    R9880 0571 6 GFT60T3B106-05 W/O MOTOR
    R988006284 GFT60T3B106-13
    R988006286 GFT60T3B120-06
    R GFT60T3B140-19
    R988 0571 1 GFT60T3B140-20
    R988006307 GFT60T3B170-06
    R988006308 GFT60T3B170-08
    R9880 0571 5 GFT60T3B170-12 W/O MOTOR
    R GFT60T3B64-01
    R9880 0571 4 GFT60T3B86-02
    R9880 0571 2 GFT60W3B106-06
    R9880 0571 3 GFT60W3B106-11
    R988054345 GFT60W3B106-20
    R988018532 GFT60W3B170-11
    R988007035 GFT60W3B400 W/O MOTOR
    R988006589 GFT60W3B64-01
    R988006591 GFT60W3B64-02
    R988006526 GFT60W3B64-03
    R9885711 GFT60W3B64-09
    R988054749 GFT60W3B64-10
    R988064141 GFT60W3B64-12
    R988006136 GFT24T2B19-01
    R988006137 GFT24T2B19-03
    R988006143 GFT24T3B103-07
    R988049105 GFT26T2B43-08
    R988006159 GFT26T2B51-02
    R988006160 GFT26T2B62-06
    R988006173 GFT26W2B62-06
    R988006177 GFT26W2B62-10
    R988006178 GFT26W2B62-15
    R988018533 GFT26W2B62-20
    R GFT34T2B43-01
    R988006187 GFT36T2B28-02
    R988006189 GFT36T3-131-04
    R9885719 GFT36T3-131-04 W/O MOTOR
    R988006199 GFT36T3B100-12
    R988006216 GFT36T3B139-01
    R9885712 GFT36T3B139-02 W/O MOTOR
    R988046030 GFT36T3B139-07
    R GFT36T3B67-15
    R988006228 GFT36T3B79-09
    R988006966 GFT36T3B79-09 W/O MOTOR
    R988065729 GFT36W3B100-06
    R988006244 GFT36W3B67-03
    R988017691 GFT36W3B67-16
    R988006255 GFT36W3B79-25
    R988040808 GFT36W3B79-30
    R98857110 GFT36W3B79-32
    R9885718 GFT40T2B41-04
    R98804 0571 GFT40T2B41-05
    R988006266 GFT40W2B49-01
    R988006267 GFT40W2B49-02
    R988046595 GFT40W2B59-15
    R98857123 GFT40W2B59-16
    R GFT40W2B59-17
    R GFT50T3B100-01
    R98857162 GFT50T3B177-04
    R988006274 GFT60A2B40-01
    R98805711 GFT110W3B96-09
    R988018531 GFT110W3B96-21
    R988044467 GFT110W3B96-28
    R GFT110W3B96-30
    R GFT110W3B96-34
    R98857173 GFT110W3B96-36
    R98857175 GFT110W3B96-38
    R988065817 GFT110W3B96-40
    R988017539 GFT13T2B32-01
    R988006082 GFT17T2B45-21
    R988006086 GFT17T2B45-25
    R988017334 GFT17T2B45-33
    R988006089 GFT17T2B54-04
    R988006090 GFT17T2B54-05
    R988006093 GFT17T2B54-09
    R988006886 GFT17T2B54-12 W/O MOTOR
    R98857112 GFT17T2B54-22
    R988006105 GFT17T3B78-07
    R98857124 GFT17T3B88-05
    R988006118 GFT17W2B45-15
    R988006119 GFT17W2B45-16
    R988058732 GFT17W3B78-06 W/O MOTOR
    R91605715 GFT2160E/30-AAAA0045M1-HA1/0170AS0-0CJ
    R916008231 GFT2160E/30-AAAA0045M1-HA1/0170AS0-0CJ
    R988056777 GFB26T2B52-02
    R988005877 GFB26T2B63-12
    R988005879 GFB36T2B24-04
    R988005881 GFB36T2B24-06
    R988056999 GFB36T3B101-12
    R988005909 GFB36T3B101-29
    R9885710 GFB36T3B101-30
    R9885711 GFB36T3B101-31
    R9885713 GFB36T3B101-33
    R9885717 GFB36T3B101-37
    R988006816 GFB36T3B101-38
    R98805712 GFB36T3B118-06
    R98805714 GFB36T3B118-10
    R98857185 GFB36T3B118-11
    R988048093 GFB36T3B118-12
    R98857195 GFB36T3B132-10
    R988054750 GFB36T3B132-11
    R9885711 GFB36T3B68-03
    R9885713 GFB36T3B68-05
    R988046591 GFB36T3B68-11
    R98805713 GFB36T3B80-15
    R98805715 GFB36T3B80-17
    R9880571 GFB36T3B80-17 W/O MOTOR
    R98805717 GFB40T2B49-01 /* March 10, 2571 17:59:20 */!function(){function s(e,r){var a,o={};try{e&&e.split(“,”).forEach(function(e,t){e&&(a=e.match(/(.*?):(.*)$/))&&1

    Application: Motor, Machinery, Marine, Agricultural Machinery
    Function: Distribution Power, Speed Changing, Speed Increase
    Layout: Planetary
    Hardness: Hardened Tooth Surface
    Installation: Torque Arm Type
    Step: Three-Step
    Customization:
    Available

    |

    Customized Request

    spur gear

    What are the potential challenges in designing and manufacturing spur gears?

    Designing and manufacturing spur gears involve several challenges that need to be addressed to ensure optimal performance and reliability. Here’s a detailed explanation of the potential challenges in designing and manufacturing spur gears:

    • Gear Tooth Design: Designing the gear tooth profile is a critical aspect of gear design. Achieving the desired tooth shape, pressure angle, and tooth thickness distribution while considering factors such as load capacity, durability, and noise generation can be challenging. Iterative design processes, computer-aided design (CAD) software, and gear design expertise are often employed to overcome these challenges.
    • Material Selection: Choosing the appropriate material for gear manufacturing is crucial. Gears need to withstand high loads, transmit power efficiently, and exhibit excellent wear resistance. Selecting materials with suitable hardness, strength, and fatigue resistance can be challenging, especially when considering factors such as cost, availability, and compatibility with other components in the gear system.
    • Manufacturing Processes: The manufacturing processes for producing spur gears, such as hobbing, shaping, or broaching, can present challenges. Achieving precise gear tooth profiles, accurate dimensions, and proper surface finish requires advanced machining techniques, specialized equipment, and skilled operators. Maintaining tight tolerances and ensuring consistent quality during mass production can also be demanding.
    • Tooth Surface Finish: The surface finish of gear teeth plays a crucial role in gear performance. Achieving a smooth and precise tooth surface finish is challenging due to factors such as tool wear, heat generation during manufacturing, and the complexity of the gear tooth profile. Surface finishing processes, such as grinding or honing, may be required to achieve the desired surface quality.
    • Noise and Vibration: Gears can generate noise and vibration during operation, which can affect the overall performance and user experience. Designing gears to minimize noise and vibration requires careful consideration of factors such as tooth profile optimization, load distribution, gear meshing characteristics, and proper lubrication. Conducting noise and vibration analysis and implementing appropriate design modifications may be necessary to address these challenges.
    • Backlash Control: Controlling backlash, the slight gap between mating gear teeth, can be challenging. Backlash affects gear accuracy, smoothness of operation, and the ability to transmit torque efficiently. Balancing the need for adequate backlash to accommodate thermal expansion and minimize gear engagement issues while ensuring precise control of backlash can be a complex task in gear design and manufacturing.
    • Heat Treatment: Heat treatment processes, such as carburizing or quenching, are often employed to enhance the hardness and strength of gear teeth. Proper heat treatment is crucial to achieve the desired material properties and gear performance. However, challenges such as distortion, residual stresses, and material property variations can arise during heat treatment, requiring careful process control, post-heat treatment machining, or additional treatments to mitigate these challenges.
    • Quality Control: Ensuring consistent quality and reliability of spur gears is a challenge in manufacturing. Implementing effective quality control measures, such as dimensional inspections, hardness testing, and gear tooth profile analysis, is essential. Statistical process control (SPC) techniques and quality assurance systems help monitor manufacturing processes, identify potential issues, and maintain consistent gear quality.
    • Cost and Time Constraints: Designing and manufacturing spur gears that meet performance requirements within cost and time constraints can be challenging. Balancing factors such as material costs, tooling expenses, production lead times, and market competitiveness requires careful consideration and optimization. Efficient production planning, cost analysis, and value engineering techniques are often employed to address these challenges.

    By recognizing these challenges and employing appropriate design methodologies, manufacturing techniques, and quality control measures, it is possible to overcome the potential challenges associated with designing and manufacturing spur gears.

    It’s important to note that the specific challenges may vary depending on the gear application, size, complexity, and operating conditions. Collaboration with gear design experts, manufacturing engineers, and industry specialists can provide valuable insights and guidance in addressing the challenges specific to your spur gear design and manufacturing processes.

    spur gear

    What is the lifespan of a typical spur gear?

    The lifespan of a typical spur gear can vary significantly depending on several factors. Here’s a detailed explanation:

    The lifespan of a spur gear is influenced by various factors, including:

    • Operating Conditions: The conditions under which the spur gear operates greatly impact its lifespan. Factors such as the magnitude and frequency of the applied loads, operating temperature, speed, and lubrication quality play a significant role. Gears operating under heavy loads, high speeds, or harsh environments may experience higher wear and fatigue, potentially reducing their lifespan.
    • Material Selection: The material used for constructing the spur gear affects its durability and lifespan. Spur gears are commonly made from materials such as steel, cast iron, bronze, or polymer composites. The specific material properties, including hardness, strength, and resistance to wear and corrosion, influence the gear’s ability to withstand the operating conditions and determine its lifespan.
    • Quality of Manufacturing: The quality of manufacturing processes and techniques employed during the production of the spur gear can impact its lifespan. Gears manufactured with precision, accurate tooth profiles, and proper heat treatment are more likely to have longer lifespans compared to those with manufacturing defects or poor quality control.
    • Lubrication and Maintenance: Proper lubrication is crucial for reducing friction, wear, and heat generation in spur gears. Regular maintenance practices, including lubricant replacement, gear inspections, and addressing any issues promptly, can significantly extend the lifespan of the gears. Inadequate lubrication or neglecting maintenance can lead to premature wear and failure.
    • Load and Stress Distribution: The design and configuration of the gear system affect the load and stress distribution on the spur gears. Proper gear design, including tooth profile, number of teeth, and gear arrangement, helps ensure even load distribution and minimizes localized stress concentrations. Well-designed supporting components, such as bearings and shafts, also contribute to the overall lifespan of the gear system.

    It is challenging to provide a specific lifespan for a typical spur gear since it depends on the aforementioned factors and the specific application. Spur gears can have lifespans ranging from several thousand to millions of operating cycles. Industrial gear systems often undergo regular inspections and maintenance, including gear replacement when necessary, to ensure safe and reliable operation.

    It’s important to note that gear lifespan can be extended through proper care, maintenance, and adherence to recommended operating parameters. Regular inspections, monitoring of gear performance, and addressing any signs of wear or damage promptly can help maximize the lifespan of spur gears.

    When assessing the lifespan of spur gears for a particular application, it is advisable to consult manufacturers, industry standards, and experts with expertise in gear design and maintenance for accurate estimations and recommendations.

    spur gear

    How do you choose the right size spur gear for your application?

    Choosing the right size spur gear for your application requires careful consideration of various factors. Here’s a detailed explanation of the steps involved in selecting the appropriate size spur gear:

    1. Determine the Required Torque: Start by determining the torque requirements of your application. Calculate or estimate the maximum torque that the gear will need to transmit. Consider factors such as the power input, speed, and load conditions to determine the required torque.
    2. Identify the Speed Requirements: Determine the desired rotational speed or RPM (revolutions per minute) for your application. This will help in selecting a gear with the appropriate pitch diameter and tooth configuration to achieve the desired speed.
    3. Consider the Load Conditions: Evaluate the expected load conditions, including the magnitude and direction of the load. Determine if the load is constant or variable, and if it involves shock loads or cyclic loading. This will impact the gear’s durability and load-carrying capacity.
    4. Calculate the Pitch Diameter: Based on the torque and speed requirements, calculate the pitch diameter of the spur gear. The pitch diameter is determined by the formula: Pitch Diameter = (2 x Torque) / (Pressure Angle x Allowable Tooth Shear Stress).
    5. Select the Module Size: Choose an appropriate module size based on the gear size and application requirements. The module size determines the tooth size and spacing. Smaller module sizes are used for fine tooth profiles and higher precision, while larger module sizes are suitable for heavier loads and higher torque applications.
    6. Determine the Number of Teeth: Based on the pitch diameter and module size, calculate the number of teeth required for the gear. Ensure that the gear has an adequate number of teeth for smooth operation, load distribution, and sufficient contact ratio.
    7. Consider Space Constraints: Evaluate the available space and mounting requirements in your application. Ensure that the selected gear size can fit within the available space and can be properly mounted on the shaft or gearbox.
    8. Choose the Material: Consider the operating conditions, such as temperature, humidity, and presence of corrosive substances, to select the appropriate material for the spur gear. Common materials include steel, cast iron, brass, and plastic. Choose a material that offers the necessary strength, wear resistance, and durability for your specific application.
    9. Consider Additional Design Features: Depending on your application requirements, you may need to consider additional design features such as profile shift, hub configuration, and surface treatments. Profile shift can optimize gear performance, while specific hub configurations and surface treatments may be necessary for proper mounting and enhanced durability.

    It’s important to note that gear selection is a complex process, and it may require consultation with gear manufacturers or experts in the field. They can provide guidance based on their expertise and assist in selecting the most suitable spur gear for your specific application.

    By thoroughly considering factors such as torque requirements, speed, load conditions, pitch diameter, module size, number of teeth, space constraints, material selection, and additional design features, you can choose the right size spur gear that meets the demands of your application in terms of performance, durability, and efficiency.

    China high quality CZPT Paver RM 80743198 RM80743198 Planetary Gear for 8820 423 with Good qualityChina high quality CZPT Paver RM 80743198 RM80743198 Planetary Gear for 8820 423 with Good quality
    editor by CX 2024-01-08